Hammond B-3 Organs ~ Leslie Speakers ~ Parts ~ Trek II Products ~ Motion Sound

Trek II Products - Leslie Speaker Parts

Trek II UC-1A Combo Preamp


Trek II UC-1A Combo Preamp
Show Larger Picture
Trek II UC-1A Combo Preamp

Price $598.00


Product Details for Trek II UC-1A Combo Preamp

Allows most single channel Leslie speakers to be driven by your portable organ, guitar, synthesizer or mixer. Two 1/4" phone jack inputs, one for high level signals, one for low level signals.

FEATURES:

  • Foot switch tremolo control.
  • Foot switch power on / off.
  • Power and tremolo indicators.
  • Input level and tone controls.
  • Four different outlets to accommodate each of the Leslie families listed below. May be used singularly or in any combination. (Leslie connector cables not included.)
GROUP 1 (11 Pin):
  • 122XB, 130, 315, 330, 412, 415, 422, 615, 705*, 715, 716, 720*, 722, 723, 730*, 740, 750, 771, 815, 820, 822, 840, 860, 912, 914, 2101
GROUP 2 (9 Pin):
  • 700*, 710*, 760, 770, 825, 900, 910, 925
GROUP 3 (6 Pin):
  • 21H, 22H, 22R, 31H*, 122, 122A, 122R, 122RV, 122V, 142, 222, 222RV, 242
GROUP 4 (6 Pin):
  • 25*, 44W, 45*, 46W, 47, 125*, 145, 147, 147A, 147RV, 225*, 245, 247, 247RV
NOTES: The UC-1A will also function with 700, 705, 710, 720 and 730 type cabinets when the LCO-1 or LCO-1A crossover is installed in tone cabinet. Model 31H is compatible only if above serial # 5200. Models 25, 45, 125, and 225 are compatible only if equipped with amplifier.

SPECIAL NOTES REGARDING THE UC-1A: The UC-1A is available in both 110 Volt and 220/240 Volt versions. However, since the AC power supplied to the UC-1A is passed along to the Leslie 6 and 9 pin connectors, the UC-1A must be ordered with the same voltage rating as the Leslie(s) being used.

EXAMPLES:
  • If you have a 110 Volt Leslie, and 110 Volt line voltage...use 110 Volt UC-1A.
  • If you have a 220/240 Volt Leslie, and 220/240 Volt line voltage...use 220/240 Volt UC-1A.
  • If you have a 110 Volt Leslie, and 220/240 Volt line voltage...use 110 Volt UC-1A, and plug the UC-1A into an external 220 to 110 Volt step-down transformer.
IMPORTANT NOTE REGARDING 220/240V LESLIES IN THE 147 FAMILY: 220/240V Leslies in the 147 family were manufactured with either a 120V or 240V tremolo control relay. The UC-1A can be made compatible with either type, however the relay voltage of the particular unit MUST be determined first so that the UC-1A can be configured properly. Contact the factory for assistance in determining the requirements of your particular unit.
Other products you might like:
Trek II LCO-1A Crossover, Leslie Cable Assembly 6-6 Pin, Leslie Cable Assembly 9 Pin, Leslie Cable Assembly 11 Pin



Photos | Testimonials | FAQs | Policies | © 2014 B3 Guys. All Rights Reserved.